Artec MULTIEYE User Manual Download Page 67

Page: 67 / 204

MULTIEYE-HYBRID interface

7.4.5.3

PTZ control via popup menu

Via the camera window context menu you directly can call up the PTZ control window in MultiScreen.

You can control a camera directly from within this PTZ control window.

Depending on the PTZ protocol and the kind of camera attached,

various functions are available here.

According to those factors, presets can be defined and accessed.

You can access further PTZ functions (type-dependent) via the arrow

symbol

for example:

7.4.5.4

PTZ via joystick and/or keyboard

A camera can be controlled, scanned, tilted and zoomed with a joystick.

To activate this capability, just click on “

PTZ via Joystick

” in the camera pop-up menu window.

Zoom In Zoom Out

Summary of Contents for MULTIEYE













































































































































































































Search results

Summary of Contents for MULTIEYE

Reviews:

Brands by name

Popular brands

Artec MULTIEYE, User Manual

Search results

Summary of Contents for MULTIEYE

Reviews:

Brands by name

Popular brands