Artec MULTIEYE User Manual Download Page 53

Page: 53 / 204

MULTIEYE-HYBRID interface

MultiScreen is divided into a toolbar and a screen area with camera windows

Important:

Only the visible cameras will be recorded!

After MultiScreen has started, this MultiScreen symbol appears in the Windows System Tray next

to the Windows clock.

7.2

Configuring MultiScreen

7.2.1

Drag&Drop

Many functions can be conveniently set by Drag&Drop. For example, the camera windows on

MultiScreen can be moved around freely or storage areas can be allocated to cameras.

Example:

With the mouse pointer, go to the panel of the camera which is to be displayed and with which you wish to

record. Left-click on the image and hold the button pressed. Now drag the image to a window of your choice and

release the mouse button. The camera image will appear in the selected window.

Summary of Contents for MULTIEYE













































































































































































































Search results

Summary of Contents for MULTIEYE

Reviews:

Brands by name

Popular brands

Artec MULTIEYE, User Manual

Search results

Summary of Contents for MULTIEYE

Reviews:

Brands by name

Popular brands