31
Define the scan area
To define a scan area, move the cursor to the Preview window when the
first pre-scan is done. The cursor changes to a
cross
in the Preview
Window. Click and hold the left button of your mouse to drag a rectangle
around the desired scan area of the image. Release the mouse button.
Repeat the same step to re-define a scan area. For multiple areas, please
refer to
Batch scan.
To discard the scan area, simply click the left mouse
button outside the rectangle anywhere in the Preview Window.
Defined scan area rectangle can be maneuvered by placing your cursor
inside it. When the cursor changes to a four-way arrow, hold down the left
button of your mouse and drag the rectangle to the desired area on the
preview image. Dragging any of the four edges or corners on the defined
rectangle when the cursor becomes a two-way arrow at the edge can also
change the size of the defined area. You can also directly type values in
the Width and Height box to outline the rectangle. These values are
measured with the unit specified in the unit box on the lower left corner of
the Preview Window.
