5-7
FlexiBowl
®
-
models 350 - 500 - 650 - 800
CHAPTER 5 - Transport and installation
iMporTanT!
The work surface must be sufficiently lit. If there are shady or uneven zones in the workplace, it is up to
the user to provide suitable lighting devices.
If these requirements are not met, the Manufacturer declines all liability.
5.3.3
Installation site
For installation, prepare an area suitable for the dimensions of the machine and lifting vehicles, paying attention to any
obstacles (other machines, walls or similar) along the path of the handling vehicles.
5.3.4
Machine position
step
Action
1
Place the FlexiBowl
®
on a stable surface.
note:
if the FlexiBowl
®
is installed on a machine platform (sensitive to vibrations), put some insulating and
vibration damping material between the platform and the FlexiBowl
®
.
2
Fix the FlexiBowl
®
through the holes.
note:
the FlexiBowl
®
has 4 x 6.5 mm holes on its base so that it can be fixed to a surface.
3
Connect as necessary (see the
“Connections”
section).
CaUTion!
Make sure the machine support surface is flat and horizontal, and can withstand its weight.
Summary of Contents for FlexiBowl 350
Page 6: ...0 6 Instructions for use and warnings TABLE OF CONTENTS PAGE INTENTIONALLY LEFT BLANK...
Page 24: ...3 6 Instructions for use and warnings CHAPTER 3 Safety measures PAGE INTENTIONALLY LEFT BLANK...
Page 82: ...9 2 Instructions for use and warnings CHAPTER 9 Attachments PAGE INTENTIONALLY LEFT BLANK...
