Arroyo Instruments TECSource 5400 Series, User Manual

Page: 4 / 60

Page 4 · 5400 Series TECSource User’s Manual
 TECSource Cable, 17W2 to DB15, 15A, 2m (p/n 1264-DB15)
This cable has a 17W2 male connector for the instrument end and a
DB15 female connector for the mount end, and is used to connect the
5400 to mounts that utilize the DB15 TEC connector, such as the 274
TECMount . The 1264-DB15 supports up to 15A of TEC current.

4400/5400 Series 2U Rack Mount Kit (p/n 1403-RM)
For installing your 5400 Series TECSource into a standard 19” rack.

10k Ω Thermistor (p/n 1600-10K)
100 Ω Platinum RTD (p/n 1600-100RTD)

RS-232 NULL Cable, 3m (p/n 1200-NULL)
 USB Cable, 3m (p/n 1201)
Safety Terms and Symbols
The following safety-related terms are used in this manual:

Warnings (noted by the WARNING heading) explain dangers that
could result in physical injury or death;

Cautions (noted by the CAUTION heading) explain conditions that
could result in damage to the instrument, other equipment, or your
device.

Notes (noted by the NOTES heading) are not safety-related, and are
intended simply to point out important information.
If, at any time, any of the following conditions exist, or are suspected of existing,
discontinue use of the unit until it can be inspected by qualified service
personnel:

Visible damage to the unit, including damage or stress caused during
product shipment;

Storage of the unit outside the standard storage temperature or
humidity rating, or prolonged storage under harsh conditions;

Failure to operate properly.
If needed, contact your distributor or Arroyo Instruments for service or repair to
ensure the safety of the product is maintained.