#1: Flexible Shaft (precut to the right length to fit in directly to your boat).
#2: Rudder Assembly and Bolts.
#3: 7016/2 Prop (factory sharpened, balanced and polished).
#4
：
6717/3 Prop (factory sharpened, balanced and polished).
#5
：
Hydro
Curved
Turn Fin and Bolts.
#6:
Boat Display Stand.
#7:
15kg Metal Gear HiTorque Servo (for rudder operation).
#8: CNC Dual Servo Mount and Bolts.
#9: Prop Nut.
#10: Receiver Switch Cover.
#11: Antenna Tube with Black Cap
#12: Shaft Drive Dog
Tools Required
You will need the following tools and items to complete the installation:
#1: Phillips Screwdriver
#2: Scissors
#3: Wire Cutter
#4: Hex Wrench (1.5mm, 2mm, 4mm)
#5: Spanner (7mm, 8mm, 16mmx2)
#6: Spark Plug Spanner
#7: Loctite
#8: Shaft Grease
#9: Lubricating Oil
#10: Zip Ties
#11: Small Hole Opener
#12: 4mm Round File (with handle)
Step 2: Boat Display Stand Assembly
