Arris NVG595, Administrator'S Handbook

Page: 14 / 226

Administrator’s Handbook
14
Broadband
Ethernet
Solid Green = Good broadband connection.
Flashing Green & Red = If the broadband connection fails to be established for more than three
consecutive minutes the LED switches to Flashing Green when attempting or waiting to establish
a broadband connection alternating with a five second steady Red . This pattern continues until the
broadband connection is successfully established.
Flashing Red = No signal on the line. This is only used when there is no signal, not during the train-
ing sequence.
Off = The device is not powered.
Broadband
Fiber
Solid Green = Good broadband connection.
Flashing Green
&
Red
= If the broadband connection fails to be established for more than three
consecutive minutes the LED switches to Flashing Green when attempting or waiting to establish
a broadband connection alternating with a five second steady
Red
. This pattern continues until the
broadband connection is successfully established.
Flashing Red = No signal on the line. This is only used when there is no signal, not during the train-
ing sequence.
Off = The device is not powered.
Service
Solid Green = IP connected (The device has a WAN IP address from DHCP or 802.1x authentication
and the broadband connection is up)
Flashing Green = Attempting connection, attempting IEEE 802.1X authentication or attempting to
obtain DHCP information.
Red = Device attempted to become IP connected and failed (no DHCP response, 802.1x authentica-
tion failed, no IP address from IPCP, etc.). The Red state times out after two minutes and the Service
indicator light returns to the Off state.
Off = The device is not powered or the broadband connection is not present.
Phone 1, 2
Solid Green = The associated VoIP line has been registered with a SIP proxy server.
Flashing Green = Indicates a telephone is off-hook on the associated VoIP line.
Off = VoIP not in use, line not registered or Gateway power off.
WPS
(opens after
using WPS
button)
Solid Green = Wi-Fi Protected Setup has been completed successfully. It should stay on for 5 minutes
or until push button is pressed again.
Flashing Green = for 2 mins. Indicates when WPS is broadcasting.
Flashing Red = for 2 min, when there is a Session overlap detected (possible security risk) in scenario.
Solid Red = Error unrelated to security, such as failed to find any partner, or WPS is disabled. It should
stay Solid Red for 5 min or until push button is pressed again.
Off = The device is not powered, no cable or no powered devices connected to the associated ports.
LED Action