Arris Moxi, User Manual

Page: 115 / 128

RESET MENU
OK
Infrared Emitter
Subchannel separators
Many networks broadcast multiple digital subchannels. For example, some networks broadcast four standard definition subchannels identified using a decimal
point (such as 09, 09.1, 09.2, and 09.3). When using the arrow buttons to navigate the electronic program guide, these channels appear in order in the
channels listing. To button-press directly to these subchannels, use the jump button (which also has a dot) on the number pad to represent the decimal point.
For example, to go directly to channel 09.2, on the remote control number pad press 0, 9, jump, and then 2.
Infrared Receiver
When a button on the Moxi remote is pressed, the infrared signal is sent to an IR receiver. The receiver then sends commands to electronic components.
For the IR receiver to send its signals to the Moxi system, it must have a clear view of the front panel of the Moxi system (see the following figure).
111