Arris Moxi, User Manual

Page: 109 / 128

A/V DELAYS
Digital TVs have a noticeable delay in audio
decoding, formatting, and preparing the video
for the display.
Using the TV speaker output for the Moxi
system output results in an audio delay to
the speaker. If you use both the speaker and
the Moxi system output, you get a noticeable
echo or worse delay effect.
To avoid the delay and echo effects, We
recommend using the TV’s audio output or
the Moxi system’s audio output, but do not
use both, simultaneously.
Audio Connection
Audio Cable Connection
If you’re using any cable for video other than HDMI, you’ll need to connect an additional cable to
receive audio. For digital audio, connect an S/PDIF cable between Moxi and the TV.
For analog audio, connect the red and white R/L cable or the red and white portions of the
composite/R/L cable bundle between Moxi and the TV.
Audio Receiver Connection
If you choose to connect an audio receiver, you may need to purchase additional cables.
Follow the Moxi HD DVR Quick Start Guide through Step 3.
At Step 4, use one HDMI cable to connect your TV to your audio receiver. Then use an additional
HDMI cable to connect your audio receiver to your Moxi HD DVR.
Alternately, you could use the following cables for an audio connection:
• For digital audio, connect an S/PDIF cable to the Moxi and the receiver
• For analog audio with a receiver, connect composite stereo cables between the receiver and the L
and R ports of the Moxi HD DVR
Configuration Alternatives
105