Arris DZS3000NV, User Manual

Page: 392 / 426

15
ENGLISH
Installation
❖
Connecting to the power supply
Your box is designed for use only with the supplied 12 V power-supply unit .
The 12 V power-supply unit operates with a 200-240 V AC, 50 Hz mains supply . Do not
connect it to any other electricity supply than this .
1 . Connect the power-supply unit to the 12 V input (marked DC IN) on your box,
as shown in the diagram below .
2 . Connect the 12V power supply unit to the mains wall-socket . If there is a switch
by the mains wall-socket, switch it on .
3 . Connect your other equipment to the mains supply .
CAUTION
To disconnect power from your box, always remove the 12 V power-supply unit from the
mains supply (rather than disconnect the 12 V power-supply unit from your box) .
Your box must therefore be installed near to the mains socket-outlet, which should be
easily accessible .
If you are in any doubt about the mains lead, its plug or its connection, consult a competent electrician.
ETHERNET
A/V SPDIF A/V SPDI DIF F
SAT IN
+12V DC
2.5A
ETHERNET
A/V SPDIF
5V DC
500mA MAX
5V DC
1A MAX
13/18V DC
350mA MAX
1
2
12 V DC input
12 V power
supply unit
Wall-socket