9
4
Setup Remote Head
Step 1
Alignment for Top Down
Step 2
Home Position
Step 3
Tilt Lock
Mounting the the SRH-3 stabilized remote head to a crane, dolly, support arm
or any other device, has to be done by experienced operator or grip personal.
Make sure that all safety regulations have been considered.
DANGER
NOTICE
To be able to do a
90° top down
shot, the camera needs
to mounted in a certain way into the ring.
The junction boxes of the ring needs to point in the
same direction as the lens.
If you don’t align the
home
position
, the
performance of the remote head will be affected
and the pan range will be
reduced
by more than
50%
.
CAUTION
Before powering up the remote head, align the
home position
indicator arrows as shown.
CAUTION
While the
camera setup
the
Tilt Lock
needs to be
engaged
!
Before
powering
up the remote head, the
Tilt Lock
must
be
disengaged
!
An
engaged
Tilt Lock
may
cause
damage
by
overheating the tilt motors.
DANGER
Remote Head Setup
Locked
Unlocked