23
12.4
Follow / Pan Lock
The
Follow
mode allows the horizontal Pan and the vertical Tilt movement
of the remote head to be synchronized with the horizontal Pan and the vertical
Tilt movement of the crane. This function is also called
Pan Lock
.
Selecting
Follow
will open a new submenu.
The Follow Mode menu will control the
Speed
,
Deadband
and
Ramp
of the
Follow
mode individually for each axis.
NOTE
In general, the
Follow
function can be used to
lock a selected axis by activating the
Follow
function and setting the
speed
for the selected
axis to
100.
The
Deadband
slider should be set
to
0
and the Ramp slider set to
0
.
Follow Speed
The
Follow Speed
selection will open a new menu
with a slider to allow the operator to set the speed
of the follow function individually for each axis.
NOTE
The minimum speed should be
100
to enable
the
Pan Lock
.
Follow Deadband
The Follow
Deadband
selection opens a new menu
with a slider that allows you to set the
Deadband
of
the
Follow
function for each axis individually.
NOTE
The Deadband should be
0 to max 30
to enable
the
Pan Lock
.
Follow Ramp
The Follow
Ramp
selection opens a new menu with
a slider that allows you to set the
Ramp
of the
Follow
function for each axis individually.
NOTE
The Ramp should be
0
to enable the Pan Lock.
Follow On/Off
Remote Head Setup
Deadband
Submenu
Follow
Submenu
Ramp
Submenu
Speed
Submenu
