33
16
Profile Management
16.1
Selecting Profiles
During use, all values, assignments
and settings are permanently written
to the selected profile.
In this case in Profile 1.
Selecting Profile
opens a new window where another profile can be selected.
16.2
Startup Settings
To ensure that the remote head works properly when it is switched on even when the
remote control is not connected, you can save the current profile in the remote head.
In this way, the remote head starts with working PID values and LBUS settings until the
remote control is connected.
Selecting
Startup Settings Apply
will
save the actual profile in the remote head.
16.3
Profiles Backup
As a backup all nine profiles of the remote control can be stored in the remote head.
If the remote control needs to be swapped, you can write your existing profiles back
to the new remote control.
Selecting
Save Settings to Head
will
save the all profiles in the remote head.
Selecting
Read Settings from Head
will
write back all profiles in the remote control.
Profile Management
Standard J1 Pan
Standard J1 Tilt
Knob 8
Standard J1 Pan
Standard J1 Tilt
Knob 8
