F
u
n
c
ti
o
n
a
l E
x
p
a
n
s
io
n M
o
d
u
le F
E
M
-2
96
Incompatible Accessories
Use of the following equipment is not permitted,
as it will cause permanent damage to the
camera or the FEM-2!
UC-C2 Run Cable ............................................. K2.52076.0
LC-S1 Power Cable ........................................... K4.46859.0
LC-S2 Power Cable........................................... K2.47146.0
LC-S3 Power Cable ...........................................K2.47147.0
LC-A1 Battery Adapter Cable ........................... K2.41385.0
LC-A2 Battery Adapter Cable ........................... K2.41386.0
LC-A3 Battery Adapter Cable ...........................K2.44022.0
LC-C1 Run Cable .............................................. K2.41398.0
LC-C Run Cable ................................................ K2.41399.0
13.6. Replacing the FEM‑2
The FEM-2 is part of the ARRIFLEX D-21
and 435 Xtreme and available as an optional
expansion for the ARRIFLEX 435 Advanced.
If the FEM-2 module is interchanged between
cameras, always make sure that the software
and firmware requirements listed above are
met!
Switch off the camera and disconnect all cables
from the camera and FEM-2 before removing
the FEM-2!
This procedure must be carried out on a static-
free workstation.
Note: The camera should be securely placed on a
stable flat surface or fixed on a pivoting head
to provide a secure working environment.
