C
a
m
e
ra O
p
e
ra
ti
o
n
83
11.5. Mirror Shutter Angle and Warning Signal
Enabling/Disabling the Asynchronous
Running Warning Signal (Mode 4)
Change from mode 1 to mode 4 by pressing
•
the MODE button three times.
Press the SEL button once to access
•
the warning signal settings.
Within three seconds, press the SET button to select
•
one of the four settings shown in the table below.
Note: Mode 4 actually is Mode 6 based on the ARRI
camera display reference structure. Electronic
accessories therefore identify it as Mode 6.
Display
Warning signal on start
Warning signal on stop
LS _ _
off
off
LS – _
on
off
LS _ –
off
on
LS ––
on
on
Setting the Volume of the Warning Signal
Change from mode 1 to mode 4 by pressing
•
the MODE button three times.
Press the SEL button twice to access
•
the warning signal volume setting.
Select the desired volume with the SET button
•
(0 = off, 3 = maximum volume)
