A
c
c
es
s
o
ries
106
14.8. Shoulder Set S‑5
The shoulder set S-5 allows switching the camera
from tripod to shoulder without having to remove the
optical accessories. Available set and components:
Shoulder Set S‑5 complete
(K0.70410.0)
With left and right grips including run/stop switch and
ergonomically shaped shoulder pad for the D-21
➪
image
.
Shoulder Set S‑5
(K2.70450.0)
With left and right grips including run/stop
switch for the D-21 and other ARRIFLEX cameras
(shoulder pads available separately).
Shoulder Pad for D‑21
(K2.70011.0)
Ergonomically shaped shoulder pad for the D-21.
To attach the shoulder set to bridge plate BP-8 or BP-9:
Screw the shoulder pad to the back of the shoulder set.
•
Slide the shoulder set from the rear into the
•
dovetail guide of the bridge plate as far as it
will go. A latch pin will automatically keep
the shoulder set in the correct position.
Clamp the shoulder set using the
•
bridge plate clamping lever.
Plug the cable for the remote RUN button
•
into the camera's RS socket.
Check that the shoulder set is firmly
•
seated on the camera.
To detach the shoulder set:
Open the clamping lever on the bridge plate.
•
Pull the latch pin on the bottom of the shoulder
•
set and slide the shoulder set backwards and
out of the bridge plate's dovetail guide.
