ARRI ARRIFLEX 16SR3 Instruction Manual Download

Page: 48 / 113

Optical Accessories

Finder Extension FE-2

The finder extension used in combination with the
levelling rod allows comfortable work with the tripod -
the viewing height remains stable.

Mounting

• Loosen the knurled ring

on the viewfinder.

• Remove the eyepiece.
• Attach the finder extension to the viewfinder, magnifi-

cation adjustment

on the user side.

• Ensure that the pin locks into the groove on the

viewfinder.

• Pull the knurled ring tight.
• Attach the eyepiece to the finder extension.
• Ensure that the pin locks into the groove on the finder

extension.

• Pull the knurled ring tight.
• Readjust the image by turning 180

with the image

compensator. See chapter 6.

The finder extension is equipped with an magnification
adjustment 10x to 17x. This is activated by turning the
lever.

Two finder extensions can be used together. In this case
the finder extension on the eye side must be set to 10x.

knurled
retaining
ring

2x magnification
selector lever

Summary of Contents for ARRIFLEX 16SR3


















































































































Search results

Summary of Contents for ARRIFLEX 16SR3

Reviews:

Related manuals for ARRIFLEX 16SR3

Brands by name

Popular brands

ARRI ARRIFLEX 16SR3, Instruction Manual

Search results

Summary of Contents for ARRIFLEX 16SR3

Reviews:

Related manuals for ARRIFLEX 16SR3

Brands by name

Popular brands