manualshive.com logo in svg

ARRI ARRIFLEX 16SR3, Instruction Manual, Page: 13 / 113

Share
Download
ARRI ARRIFLEX 16SR3 Instruction Manual Download Page 13

11

Installation

Shoulder Set S-3

The shoulder set S-3 has adjustable grips and an
integrated shoulder pad which allows comfortable
hand-held camera operation.

Mounting

• Attach the shoulder set with the central clamp screw

into the tripod thread (3/8") on the camera base
ensuring that the index pin on the shoulder set aligns
correctly with the locating hole in the camera base.

• Adjust and position the handgrips on the shoulder set

.

• Connect the cable to one of the RS-sockets 

 on

the right side of the camera

Camera Handgrip

The anatomically-shaped camera handgrip with the
RUN push button is intended for shoulder operation.
The shoulder pad can be used for more comfortable use
of the camera on the shoulder.

Mounting

• By turning the intermediate ratchet mounting ring, the

angular outward position of the handgrip can be
changed to the operator’s personal fit.

• Attach the handgrip to the right rosette mount on the

camera in the desired angle of inclination.

• Connect the cable to one of the RS-sockets 

 

on

the right side of the camera.

Summary of Contents for ARRIFLEX 16SR3


















































































































Reviews:

No comments