ARRI ARRIFLEX 16SR3 Instruction Manual Download

Page: 79 / 113

ideo-Assist-System

• Unscrew the 4 screws

SW 1,5 (key width 1,5

mm) on the beamsplitter.

• Remove the beamsplitter at the bevelled edges (under

the markings).

• Insert the desired beamsplitter and screw on with the
4 screws

Mounting the Video Optic

• Attach the video handle without the video optic.
• Screw on with 4 screws, ensuring that the adjustment

sockets for the beamsplitter and the carrying handle
engage together.

• Attach the video optic to the video carrying handle.
• Screw tight with the knurled knob

• Pull tight the clamp ring

• Screw the video camera onto the C-mount thread on

the video optic.

• Loosen the clamp ring

approx. 15

(as seen in

the direction of shooting, counter-clockwise).

• Turn the CCD-camera into the correct angle position

(the marking on the back of the camera must stand
upright).

• Pull tight the clamp ring.
• Screw the handles

on the clamp ring into the

desired position SW 1,5.

locking lever

lock ring

focus ring

iris ring

Summary of Contents for ARRIFLEX 16SR3


















































































































Search results

Summary of Contents for ARRIFLEX 16SR3

Reviews:

Related manuals for ARRIFLEX 16SR3

Brands by name

Popular brands

ARRI ARRIFLEX 16SR3, Instruction Manual

Search results

Summary of Contents for ARRIFLEX 16SR3

Reviews:

Related manuals for ARRIFLEX 16SR3

Brands by name

Popular brands