Array electronic TC-Pro482CRA, User Manual, Page: 54 / 56

53
Multifunction LCD Digital Timer/Counter/Tachometer
Dual counter
Parameter name parameter Setting range
Default
value
Unit
Set
value
Screen
Dual
count
value
--- -99999~999999
000000 ---
Dual
count
set
value
---
000000~999999
(For conditions other than those described in
note 2.)
-99999~999999
(See note 2.)
Screen
2
CP
Present
value
--- -99999~999999
000000 ---
CP2
Present
value
---
000000~999999
(For conditions other than those described in
note 1.)
-99999~999999
(See note 1.)
Note:
The input mode is increment/decrement mode and the output mode is K-2, D, L or H.
The dual count calculating mode is subtraction mode and the output mode is K-2, D, L, or H.
Function setting mode
Parameter name parameter Setting range
Default
value
Unit
Set
value
Input mode cntm
up/down/ud-a/ud-b/ud-c
(See note 1.)
up ---
Dual count
calculating mode
caln
add/sub
(See note 1.)
add ---
Output mode outm
n/f/c/r/k-1/p/q/a/k-2/d/l/h
(See note 2.)
n ---
One-shot
output time
otim 000.001~999.999 000.500 s
One-shot
output 2 time
otm2 000.001~999.999 000.500 s
One-shot
output time
otm
hold/000.001~999.999
(See note 3)
hold s
Counting speed cnts 30Hz/5KHz 30hz ---
Input signal width iflt 20ms/1ms 20ms ---
Decimal point
position
dp ----/---.-/--.--/-.--- ---- ---
Prescale value pscl 000.001~999.999 001.000 ---
NPN/PNP
Input mode
imod NPN/PNP NPN ---
Key protection
level
kypt kp-1/kp-2/kp-3/kp-4/kp-5 kp-1 ---
Note:
The setting range varies with the output mode.
The setting range varies with the model and the input mode.
HOLD can not be set when the output mode is K-2.
.
2 .
.
2 .
3.