Array electronic TC-Pro482CRA, User Manual, Page: 24 / 56

23
Multifunction LCD Digital Timer/Counter/Tachometer
Tachometer Function
Power ON
Run mode
Function setting mode
See note 1
3s min.
See note 2
3s min.
For details on operation in run mode, refer to page 25.
Note: 1. If the mode is switched to the tachometer function setting mode during operation,
operation will continue.
2. Changes made to settings in function setting mode are enabled for the first time when
the mode is changed to run mode. Also, when settings are changed, the counter is
reset (measured value initialized and output turned OFF) on returning to run mode.
The characters displayed in reverse video are the initial values.
Set each setting item with the Key.
(30Hz) (10KHz)
(no decimal point) (one digit after
decimal point)
(two digit after
decimal point)
(three digit after
decimal point)
(000.001s) (001.000s) (999.999s)
( No average
processing )
( Average of 2
measurements )
( Average of 4
measurements )
( Average of 8
measurements )
(00.01s) (99.99s)
(00.00s) (99.99s)
(KP-1) (KP-2) (KP-3) (KP-4) (KP-5)
(NPN input) (PNP input)
Output mode
Counting
speed
Decimal point
position
Prescale value
Average
processing
Auto-zero time
Startup time
NPN / PNP
input mode
Key protect
level
(HI-LO) (no range) (HI-HI) (LO-LO)