60
setting menu; use
,
keys to select CV mode. Press
key to confirm and exit the mode selection and parameter setting
menu.
5
Press
key to turn on the load.
0.000V 0.000A
0.000V sCV ON
For the above operating procedures, the corresponding SCPI commands should be:
INP:SHORT ON
；
Sets the load to short circuit
MODE
CV
；
Sets the mode
INP
ON
；
Turns on the load
4.14.3
Von Point/Von Latch
Example: Set the Von Latch to Off; set Von Point to 1V; turn on the load; This example
implements the automatic turning on/off of the load`s input, which simplifies the test operations
greatly. The detailed operations are shown below:
Procedures Operation
Descriptions
Display
1
Press
key to enter into the main menu.
Load Default
：
Yes *No
2
Use
key to select the menu item “Von Latch”; use the knob
or
key to select the parameter “Off”. Press
key to
confirm.
Von Latch
：
*On Off
3
Use
key to select the menu item “Von Point”; use Entry keys
or the knob together with
,
keys to input the voltage
value. Press
key to confirm.
Von Point
：
1.000V
4
Press
key to exit the main menu.
0.000V 0.000A
0.000A CCH OFF
5
Press
key to turn on the load.
0.000V 0.000A
0.000A CCH ON
For the above steps, the corresponding SCPI commands should be:
INP: LATC
OFF
；
Disables the Von Latch
INP:
LATC:VOLT
1
；
Sets the Von voltage point to 1V
INP
ON
；
Turns on the load
4.14.4 Current Limit in CV Mode
Example: Set the load to CV mode; set the voltage value to 2V; set the current limit value in CV
mode (
CV Curr Limit
) to 20A; turn on the load. The detailed operations are shown below:
Procedures Operation
Descriptions
Display
step1
Set the load to CV mode, and set the voltage value to 2V (please 0.000V 0.000A
