49
4.8 List Operation
The operating procedures for sequence operation are shown below:
1.
Press
key +
key to enter into list operation menu.
2.
Use Entry keys or the knob to select list number (No.), and press
key to confirm.
3.
Use
key to select list memo (Memo).
4.
Use knob and
,
keys to edit memo (max. 10 characters).
5.
Use
key to select sequence data (Data:<New/Edit>). Use
,
keys or
knob to select New or Edit operation, and press
key to confirm.
6.
Select New operation, and press
to enter list data clear screen. Use
or knob
to select Yes, and press
to confirm. Now list data will be cleared and the load will
enter the step edit screen. Use
or knob to select No, then press
key to
confirm and return to the list operation menu.
7.
Select Edit, then press
to enter step edit screen.
8.
Use
,
to select parameters.
9.
Use Entry keys or use the knob together with
,
keys to input set value; or
use the knob/
key to select one operating mode, and press
key to confirm.
After setting the third parameter, press
key to confirm and enter into the next
step.
10.
If it is needed to modify one step, use
,
keys to select this step. The setting
operations for this step are the same as the operating procedure 9.
11.
If it is needed to add one step to the last step, use
key to select the new step. The
setting operations for this new step are the same as the operating procedure 9.
12.
If it is needed to insert one step above an edited step, use
,
keys to select
this edited step. The LCD display doesn`t flash at this time, and press
key +
key to insert a new step. The setting operations for this new step are the same as the
