30
3.2.2 0.5A Calibration
Press “Enter” key, you will see the following figure in the display:
Input the value you read from
FLUEK 45
, which is retained to four decimal places.
Press “Clear” key to remove the wrong input value of present digit. Then press
“Enter” key to confirm.
3.2.3 6A
Calibration
Press “Enter” key to verify and then you will see the followings:
Input the value you read from
FLUEK 45
, which is retained to four decimal places.
Press “Clear” key to remove the wrong input value of present digit. Then press
“Enter” key to confirm.
3.2.4 9A Calibration
Press “Enter” key to verify and then the display will show as follows:
Input the value you read from
FLUEK 45,
which is retained to four decimal places.
Press “Clear” key to remove the wrong input value of present digit. Then press
“Enter” key to confirm.
3.3 OV Calibration
OV calibration is a kind of automatic calibration without manual operation, which
starts after the voltage calibration is conducted and is shown in the following:
