23
2). Using “Left/Right” keys, knob and “Enter” key to input
:
①
Press “Vset” to enter into voltage setting state.
②
Press “Left/Right” keys to move the blinking digit to the corresponding digit of
the value.
③
Increase or decrease the relevant value by turning the knob clockwise or counter
clockwise, then use “Left/Right” keys to move to the next digit to modify.
④
Press “Enter” key to confirm the voltage setting value.
4. Setting the desired output current
The desired current can be set directly by pressing the number keys or using
“Left/Right” keys together with the knob.
1). Using number keys and “Enter” key to input
:
①
Press “Iset” to enter into current setting state.
②
Input the desired current value by pressing number keys. “Clear” key can be used
to clear the wrong value to input again.
③
Press “Enter” key to confirm the current setting value.
2). Using “Left/Right” keys, knob and “Enter” key to input:
①
Press “Iset” to enter into current setting state.
②
Press “Left/Right” keys to move the blinking digit to the corresponding digit of
the value.
③
Increase or decrease the relevant value by turning the knob clockwise or counter
clockwise, then use “Left/Right” keys to move to the next digit to modify.
④
Press “Enter” key to confirm the current setting value.
5. Enabling the outputs.
Press the “Output on/off” key to enable the outputs. “CC” is displayed in the lower
left corner of the display.
6. Verifying that the power supply is in the constant current mode
When the power supply is operating in the constant current mode, if the “CV” is
displayed in the lower left corner of the display, it indicates that the actual output
voltage value has reached our setting value. Therefore please choose a higher voltage
limit.
