ARMTEL IPN-8U, User Manual

Page: 8 / 36

IPN-8U NETWORK SWITCHING MODULE
USER MANUAL
page 6/32 armtel.com
© Armtel info@armtel.com
ENG
− switching of connected digital subscriber units with
Uk0-interface between themselves and other subscribers of IPN communi-
cation system in simplex mode according to configuration;
− iIndication of busy subscriber, incoming and outgoing calls, second incom-
ing call, unanswered call on the keys of the digital units with Uk0-interface;
−
activation of built-in relays of DW\DW Ex units and ACM control lines
(except for group calls);
− voice connections in “half-duplex” mode between digital subscriber units with
Uk0-interface and duplex subscribers in case of connection via SIP protocol;
− registration of calls using certified equipment and software;
− built-in self-diagnostics and remote administration via HTML – interface;
− indication for subscriber status of U-interfaces and Ethernet ports, servicea-
bility of fuses and power circuits, operating modes of the central processor
of IPN-8U module using two-color LED indicators on the front panel.
Detailed description of the functional area for IPN-8U and its programming method
are given in operational documents for IPN 1.1 system, which includes IPN-8U.
1.2 Specifications
IPN-8U has following interfaces:
− Uk0 – for connection of digital subscriber units manufactured by LLC Armtel.
−
Ethernet with PoE – for connection of the module and IP-subscribers to
IP-network.
− Uk0 interface also provides:
−
distance from IPN-8U to the subscriber up to 6 km;
− bandwidth – 6,8 kHz;
− «phantom» power supply of the subscriber unit using PoU (Power-over-U)
function with lo ad amperage of up to 300 mА.
Power consumption of IPN-8U:
− IPN-8U with disconnected Uk0-interfaces and Ethernet ports – 6,4 W;
− IPN-8U with connected DIS via Uk0-interface, without “phantom” power
supply and disconnected 4 Ethernet ports – 7,5 W;