CCS-IP2 CALL STATION
User Manual
armtel.com
page 11/52
© Armtel
1.1.3 Operations conditions
The climatic category according to GOST 15150-69, dust, foreign matter and water
ingress protection rating according to GOST 14254-2015 (IEC 60529:2013) and degree of
protection from external mechanical shock provided by enclosures according to
GOST IEC 62262-2015 depending on the design version (refer to Table 1) are given in Table 3.
Table 3 – Operation characteristics
Version identification
Cl
im
at
ic ca
te
gor
y
accor
di
ng
to
GO
ST
151
50
-69*
Pr
ote
cti
on
de
gr
ee
ac
co
rd
ing
to
GO
ST
14
254
-15
(IE
C
605
29
-20
13
)
Pr
ote
cti
on
de
gr
ee
ac
co
rd
ing
to
GO
ST
IEC
622
62
-20
15
Values of exposure factors
O
pe
ra
ting
tem
pe
ra
tu
re
ra
ng
e,
°С
U
pp
er
v
al
ue
o
f
am
be
r a
ir h
um
id
ity
,
%
Am
bi
en
t
at
m
os
ph
er
ic
pre
ss
ur
e,
kPa
(m
mH
g)
from RMLT.465311.015
to RMLT.465311.015-02
NF4.1
1)
IP66
−
from 0
to +50
80
(at +25 °C
without
moisture
condensation)
from 84 to
106,7
(from 630 to
800)
from RMLT.465311.015-03
to RMLT.465311.015-05
NF4.1
1)
−
from -20
to +50
from RMLT.465311.015-06
to RMLT.465311.015-20
NF2
2)
−
from -40
to +55
100
(at +25 °C
with moisture
condensation)
from RMLT.465311.015-21
to RMLT.465311.015-23
NF2
2)
IK08
from -40
to +55
* Taking into account the values of exposure factors
1)
Conditioned locations or partially conditioned air.
2)
Locations without temperature control. Under protector visors or tents. Temperature
fluctuation for 8 hour not more 40 °C.
The CCS-IP2 satisfies vibration resistance and vibration strength requirements in
operating conditions (refer to Table 3) when exposed to sinusoidal vibration ranging
from 10 to 55 Hz with peak acceleration amplitude of 10 m/s
2
.
The CCS-IP2 satisfies requirements for electromagnetic interference resistance
according to GOST 30804.6.2-2013 (IEC 61000-6-2:2005) with performance criteria not
lower than B. Electromagnetic interference from CCS-IP2 does not exceed standards set by
GOST 30804.6.4-2013 (IEC 61000-6-4:2006).
Note
− Under the influence of electrostatic discharges on the p
roduct enclosure
from 2 kV to 6 kV, when connecting via the ADSL line, it is necessary to connect to a
functional earthing bus of the installation site, and when connected to the PoE injector, it is
necessary to connect by shielded cable to an earthed PoE injector (see 2.4.3).
