CCS-IP2 CALL STATION
User Manual
page 48/52
armtel.com
© Armtel
APPENDIX C (REFERENCE)
CONNECTION
The CCS-IP2 may be connected through various sockets depending on the version of
the product.
The arrangement of connection interfaces in the product is shown on Figure 5.
The contact assignment of the XS3 socket of the CCS-DW-IP2 main board for
connection of a 37-57 V external power supply, connection to an ADSL line, external devices
of versions without additional modules is given in Table C.1.
Table C.1 – Numbering and contact assignment of the XS3 socket of the CCS-DW-IP2 main board
Terminal
block
number
Circuit
Function
External appearance of the
XS3 socket with contact
numbering
1
+0V
37-57 V external power
supply
2
+0V
3
(-)37-57VDC
37-57 V external power
supply
4
(-)37-57VDC
5
ADSL(-)
Connection via ADSL line
6
ADSL(+)
7
REL+
Actuating relay contacts
8
REL-
Connection type: clip connector
Core section ranging AWG: from 24 to 20 (cross-sectional area from 0,2 to 1,0 mm
2
)
The length of the exposed part of the wires: 11 mm
The power supply and interface may be connected via the RJ45 type XS1 socket of
the Ethernet interface installed on the CCS-DW-IP2 main board. This interface supports the
IEEE 802.3af standard PoE function, and is therefore integrated with the power supply
circuits of the device.
