CCS-IP2 CALL STATION
User Manual
page 30/52
armtel.com
© Armtel
b) mounting on the wall
Figure 6 – Installation of CCS-IP2 (end)
2.4.2 Connection
1.
Enter communication and power cables through the sealing cable glands into
the CCS-IP2 enclosure. Peel off the insulation from cable wires.
Install UTP cable without protective cap.
2.
Variants of connection
a)
Connect the Ethernet interface line:
–
connect the Ethernet interface line with PoE to RJ45 socket of the main
board (Table C.2);
OR
–
connect a 48 V external power supply to the XS1 socket of the main
board according to Table C.1, and the Ethernet PoE interface line to the
clip connector X1 according to Table C.3.
b)
Connect the ADSL line
−
Connect the ADSL connection cables to the clip connector XS1 of the
main board according to Table C.1 in Appendix C.
