Armstrong HumidiClean HC-6100 Series, Installation & Operating Instructions Manual

Page: 13 / 52

The menu can be accessed via the keypad below the LCD, on the front of electric cabinet. Use the UP
or DOWN to change the menu in current level; press ESC to previous menu level; press ENTER to
access the current menu. Pressing ENTER will activate selection cursor, press UP(DOWN) to increase
(decrease) the value, press ENTER to confirm the change or ESC to cancel.
13
Display Menu
Armstrong HC-6000
Enter to get into main menu
This screen will only display for 1 minute after the unit is
powered up; then it will automatically go to 'Unit Status'.
Language Language select
Unit Status Unit status display
Operation Setup
Operation variable setup
Unit Configuration Unit configuration setup
English
English - Default
Chinese
Unit Status 1
Unit Demand: XXX% Demand
Steam Output: XXX lb/hr Steam Output
Unit Status 2
Water Level: Normal Water Level State: Low, Normal and High
Gen, Fill, Drain Idle = No demand; unit idle
Gen = Steam Generation
Fill = Filling
Drain = Draining
Heat = Elements are energized to heat water to selected
aquastat setting
Temperature
Water Temp: XXX C/XXX F Temperature of water
Heat TEMP: XXX C/XXX F Temperature of heating elements
Timers
End of Life: 0:00 EOL-TMR:0000:00 (Default)
RUNTIME:0000:00
DRAIN-TMR: 0000:00
ONTIME:0000:00
OFFTIME:0000:00
RH Display
Room Current RH: XX% This menu will be displayed only when "RH Sensor" is selected
Room Current RH: XX% (Default)
Room Desired RH: XX%
Duct Current RH: XX%
High Limit Setpoint: XX%
Outside Temperature: XX°C/XX°F
Run Menu
Language
Unit Status
Run Menu
Language
Unit Status