manualshive.com logo in svg

Armstrong AIM ST6700, Installation, Operation And Maintenance Manual

Share
Download
Armstrong AIM ST6700 Installation, Operation And Maintenance Manual Download Page 62

North America  •  Latin America  •  India  •  Europe / Middle East / Africa  •  China  •  Pacific Rim

armstrong

international.com

Designs, materials, weights and performance ratings are approximate and subject to change without notice.  Visit 

armstrong

international.com for up-to-date information.

62

2.2  IR Armstrong ST6700 Provisioning and Joining

The Yokokawa environment supports two methods of provisioning and joining. Section 2.1 above covered 

one method using over the air provisioning.  The second method is out of band provisioning (IR Provisioning) 

that requires an infrared adaptor.  This manual assumes the configuration of the infrared adapter (ACTiSYS 

IR224UN) has been completed.  If not, please refer to Yokogawa manual IM 01R01A01-01E 16th Edition, 

section N.

Below are the steps required for out of band (IR) provisioning:

1. Device Check

  Open “Device Manager” on the PC to determine the COM port of the installed infrared adapter, in the below  

  example the COM port is set to COM9.

Summary of Contents for AIM ST6700





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands