Armstrong AIM ST6700 Installation, Operation And Maintenance Manual Download Page 21

Page: 21 / 116

North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim

armstrong

international.com

Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit

armstrong

international.com for up-to-date information.

Product Certifications - Continued

North American

Hazardous Location / Explosive Atmosphere

Ratings Class I, II, III; Division 1; Group A,B,C,D,E,F,G

Zone 0; Group IIC, IIB, IIA

Notes:

Install per the National Electrical Code, ANSI/ISA-RP12.06.01, the Canadian Electrical Code, and applicable

European or other international installation codes, including BS EN / IEC 60079-14, as applicable.

T4 at T ambient = -40ºC to 70ºC (-40ºF to 158ºF)

Summary of Contents for AIM ST6700





















































































































Search results

Summary of Contents for AIM ST6700

Reviews:

Brands by name

Popular brands

Armstrong AIM ST6700, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for AIM ST6700

Reviews:

Brands by name

Popular brands