manualshive.com logo in svg

Armstrong AIM ST6700, Installation, Operation And Maintenance Manual

Share
Download
Armstrong AIM ST6700 Installation, Operation And Maintenance Manual Download Page 29

North America  •  Latin America  •  India  •  Europe / Middle East / Africa  •  China  •  Pacific Rim

armstrong

international.com

Designs, materials, weights and performance ratings are approximate and subject to change without notice.  Visit 

armstrong

international.com for up-to-date information.

29

3. In the device list, click to select WDM. Next, expand the Property Panel on the right.

4. On the Property Panel, expand Provisioning. Check Transfer to PDA, and complete the following information 

under Settings. Name=handheld name, Number of Keys=100 max, Expiration (days)=31 max. When 

completed, Click Transfer Settings to transfer the security keys to the Provisioning Device handheld, then 

remove it from the docking station.

2.0 Infrared (IR) Armstrong ST6700 Provisioning and   

 

      Joining - continued

WDM

Click to expand 

Property Panel

Summary of Contents for AIM ST6700





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands