Armstrong AIM ST6700 Installation, Operation And Maintenance Manual Download Page 46

Page: 46 / 116

North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim

armstrong

international.com

Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit

armstrong

international.com for up-to-date information.

2.0 Wireless System Configuration

Field Wireless Management Console (includes the Configurator tool) is the software used to configure the Field

Wireless System. To configure the network please use the following steps:

1. Start Internet Explorer and enter assigned IP (Default http://192.168.0.101:8080) in the web browser

navigation field.

2. Click “Configurator” and the login dialog will appear.

Summary of Contents for AIM ST6700





















































































































Search results

Summary of Contents for AIM ST6700

Reviews:

Brands by name

Popular brands

Armstrong AIM ST6700, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for AIM ST6700

Reviews:

Brands by name

Popular brands