manualshive.com logo in svg

Armstrong AIM ST6700, Installation, Operation And Maintenance Manual

Share
Download
Armstrong AIM ST6700 Installation, Operation And Maintenance Manual Download Page 113

North America  •  Latin America  •  India  •  Europe / Middle East / Africa  •  China  •  Pacific Rim

armstrong

international.com

Designs, materials, weights and performance ratings are approximate and subject to change without notice.  Visit 

armstrong

international.com for up-to-date information.

113

Diagnostic: Communication Error (Armstrong Specific)

Functional Behavior:

Diagnostic: Communication error (Armstrong specific) (Bit 28 and Bit 3 are set to 1).

Causes and Triggers:

The diagnostic flag is set if the API communication between application processor and stack radio module 

is not working. If no Radio API Request/Response will be received by the application processor during last 

5 minutes the flag is set. If an API Request/Response is received the Communication error flag remains 

active for 5 minutes, but the internal counter will be reset for the next 5 minutes.

6.3 Device Self-Diagnosis Status Flags – continued

Summary of Contents for AIM ST6700





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands