Armstrong AGE4, Installation And Operating Instructions Manual

Page: 19 / 40

19
5.2.2 RELAYS OUTPUTS
Active relay position Deactivated relay position
5.2.3 DIGITAL INPUT (START/RUN)
Inputs RUN/0V Function description
Connected Pump runs.
Disconeected Pump in standby state.
5.2.4 ANALOG INPUT/OUTPUT (SET1, SET2, SET3)
Input/Output
Function
Function description
SET1 Run [Default - Mode 1]
Turning the pump on/off. By default activating with
connection to SET3.
SET2 MAX/Min [Default - Mode 1]
Set the pump to MAX settings when SET1 is active and to
min. settings when SET1 is inactive.
SET3 FB [Default - Mode 1]
10 V voltage output used for activating SET 1 and SET2 by
connecting them to SET3.
Configuration Function description
Fault The relay is in active position only when the pump is powered up and an error is
present.
Ready [Default] The relay is in active position when the pump is powered up and no error is
present. If an error occurs, relay will deactivate.
Run The relay is in active position when the pump is powered up and running. If the
pump is stopped or an error occurs, relay will deactivate.
No function Relay is always in deactivated position.
Always on Relay in active position