© 2013 Armored Fitness Equipment, LLC
Page 14
CHAIN TENSION:
1.
Loosen the front axle nuts by placing a
wrench on each nut, and turning either
one counter-clockwise. No more than a
full turn is necessary. You do not need
to remove the nuts, just make them
loose enough that the wheel can be
adjusted.
2.
To loosen the chain, turn each chain
tensioner nut ½ turn counter clockwise
and firmly strike the front wheel with
your hand to move it back. To tighten
the chain, turn each chain tensioner nut
½ turn clockwise. The tensioner will
pull the wheel forward and tighten the
chain.
3.
Check the chain tension. Between ⅛
inch and ¼ inch of movement up and
down under firm fingertip pressure is
ideal. Repeat step 2 until the correct
chain tension is achieved.
