© 2013 Armored Fitness Equipment, LLC
Page 15
4.
Place a wrench on both front axle nuts,
and tighten by turning clockwise. It is
best to tighten by pushing the wrench
towards the rear of the XPO Sled.
Pulling the wrench towards the front of
the XPO Sled may pull that side of the
axle forwards and ruin the alignment.
It is not necessary to tighten forcefully.
5.
By moving both chain tensioners equally, the alignment of the front wheel should be preserved.
Check alignment and if the XPO Sled does not roll straight, follow the steps for alignment.
ALIGNMENT:
We highly recommend that you watch the XPO Sled Front Wheel Alignment Demo video posted on our
website, prior to following these steps. You can find this and more video demonstrations at
www.ArmoredFitness.com
. Once there, click on the Support menu.
1.
Loosen the front axle nuts by placing a
wrench on each nut, and turning either
one counter-clockwise. No more than a
full turn is necessary. You do not need
to remove the nuts, just make them
loose enough that the wheel can be
adjusted.
