background image

2

ARMASIGHT by FLIR

COMMAND       

U S E R   M A N U A L

© 2018 FLIR Systems, Inc. All rights reserved worldwide. No parts of this manual, in whole or in part, 

may be copied, photocopied, translated, or transmitted by any electronic medium or in machine-readable 

form without the prior written permission of FLIR Systems, Inc. 
Names and marks appearing on the products herein are either registered trademarks or trademarks of 

FLIR Outdoor & Tactical Systems and/or its subsidiaries. All other trademarks, trade names, or company 

names referenced herein are used for identification only and are the property of their respective owners.
This product is protected by patents, design patents, patents pending, or design patents pending.
If you have questions that are not covered in this manual, or need service, contact FLIR OTS customer 

support for additional information prior to returning a product.
Phone:1-888-959-2259 

E-mail: [email protected]
This documentation is subject to change without notice.

FLIR OUTDOOR & TACTICAL SYSTEMS

815 Dubuque Avenue, South San Francisco, CA 94080
Phone: 1-888-959-2259 or (650) 492-7755
Fax: 1-888-959-2260
International Phone/Fax: (650) 492-7755
E-mail: [email protected]

www.flir.com 

EXPORT INFORMATION

Equipment described herein may require US Government authorization for export purposes. Diversion 

contrary to US law is prohibited.

©2018 FLIR Systems, Inc. 

 

Specifications are subject to change without notice, check our website: www.flir.com

Summary of Contents for COMMAND 336 HD





































Reviews: