19
ARMASIGHT by FLIR
COMMAND
U S E R M A N U A L
NOTE:
Various display symbols indicating the current operating state of the Command can be displayed
permanently, may appear momentarily, or can be set to appear only when a certain function is
activated.
TABLE 3-1. CONTROLS AND INDICATORS
ITEM
NO.
CONTROL/INDICATOR
FUNCTION
1
Eyepiece Focus Ring
Adjusts the eyepiece diopter. The total diopter adjustment range is
covered with 2 turns of the ring.
2
Turn-Pull Switch
Activates the Command when turned ON.
NOTE:
You must pull the knob before turning in order to use either
ON or STB.
Activates standby mode when turned to STB (see note above).
Deactivates the Command when turned OFF.
3
Control Panel Buttons
Configures operational settings. See Table 3-2 for button functions.
4
Objective Focus Ring
Focuses the objective lens. Adjusts for sharpest view of the scene.
The total focus range is covered with three quarter turns of the
lens.
5
Remote Control
Button
Activates/ deactivates the Command in standby mode. To turn the
unit on, press the button once. Press it again to turn the unit off.
—
Battery Status
Indicator
(Battery icon in the top
right hand corner of
the display)
The color fill (green/ yellow/ red) bar in the battery icon indicates
the current power level of the internal battery, or remaining battery
life.
The totally shaded battery icon indicates the fully charged battery.
The flashing transparent battery icon indicates a low battery.
The Command button control panel is shown in Figure 3-6.
FIGURE 3-5. CONTROLS
1
2
3
4
5
