17
ARMASIGHT by FLIR
COMMAND
U S E R M A N U A L
3.1.2 FASTENING AN ADVANCED WIRELESS REMOTE CONTROL
Using the supplied Velcro tape (A, Figure 3-2), fasten the remote control (B) to an easily accessible place.
You can use the Picatinny adapter for the Advanced Wireless Remote (C) for mounting the remote control
to Picatinny or Weaver rail. Install the adapter onto the rail (D). Insert the remote control into the adapter.
3.1.3 INSTALLING ADDITIONAL EQUIPMENT
Use the side Picatinny/ Weaver rail to install any additional equipment, such as the Digital Video
Recorder or the Extended Battery Pack.
3.1.4 CONNECTING AN ADDITIONAL EQUIPMENT
CAUTION:
Turn off the Command before you begin connecting/disconnecting any external equipment and
before removing the batteries.
Remove the connector’s protective cap.
Connect the cable of Digital Video Recorder or the Extended Battery Pack to the Command connector.
FIGURE 3-3. DIGITAL RECORDER INSTALLATION
FIGURE 3-2. ADVANCED WIRELESS REMOTE CONTROL
A
B
B
C
D
