Arjohuntleigh Maxi Sky 600, Technical Manual, Page: 9 / 48

9
Service Procedures
00
1.
14
15
5.3
3
r
ev
. 8
9) Remove the bottom shell by routing the battery wires, the strap and the emergency cord through their respective
openings (see Fig. 7
).
10) Remove the top shell by passing the wheels of the
trolley through the slot (see Fig. 8).
Service Procedure #2- Replacing the Handset
1) Access the handset connector by performing service procedure #1, steps 3 to 6.
2) Replace the handset with a new one and reassemble the unit by performing service procedure #9 from step 7.
Service Procedure #3 - Replacing the Batteries
1) Turn off the lift by gently pulling the red cord.
2) Unsnap and completely remove the bottom panel by pushing on both ends (see Fig. 2).
3) Disconnect the batteries (see Fig. 9).
4) Unscrew the 4 screws using a T-20 Torx screwdriver.
5) Pull out the batteries.
6) Connect the new batteries. Make sure to respect the
polarity by matching wire colors with the marks on
the batteries (red to red [+], black to black [-])
7) Screw the support plates back in.
8) Reassemble the bottom cover by performing service
procedure #9 from step 9.
Fig. 6 Fig. 7
DO NOT ATTEMPT TO USE A BATTERY NOT AUTHORIZED BY ArjoHuntleigh.
ArjoHuntleigh batteries are specially designed for ArjoHuntleigh charging systems.
Attempting to use an unauthorized battery may seriously damage the lift and/or the charger.
A
A
A
A
B
B
B
B
Both wires
Fig. 8
Fig. 9
Both wires