manualshive.com logo in svg

Arjohuntleigh Maxi Sky 600, Technical Manual, Page: 39 / 48

Share
Download
Arjohuntleigh Maxi Sky 600 Technical Manual Download Page 39

Technical Specification

PRODUCT INFORMATION Maxi Sky 600

Weight, complete (Four-function model)

12.7 kg (28 lb)

Weight, complete (Two-function model) 11.4 kg (25 lb)

Lifting capacity 272 kg (600 lb)

Strap length 2300 mm (90.6 in)

Lifting speed 6.0 cm/s (2.4 in/s) without load • 3.5 cm/s (1.4 in/s) at 200 kg (440 lb) • 

2.8 cm/s (1.1 in/s) at 272 kg (600 lb)

Maximum stroke (from ceiling) 2300 mm (90.6 in)

Horizontal displacement speeds 10, 15, 20 and 25 cm/s. Speed is 20 cm/s (7.9 in/s) by default 

Horizontal axis motor 24 VDC, 62 watts

Vertical axis motor 24 VDC, 110 watts

Operating force of control < 5 N

ELECTRICAL

Duty cycle Max 10% (6 min./hour), 1 minute continuously

Rating 24 VDC, 15 A max.

Noise level for either raising or lowering, with or without load 61 dBA max.

Medical equipment Type BF protection against electrical shock in accordance with IEC 60601-1

The Maxi Sky 600 is compliant with CAN/CSA C22.2 No. 601.1 (SUP1+AM2), UL 60601 1, 

CAN/CSA-C22.2 No. 60601-1-08, ANSI/AAMI ES60601-1: 2005 and ISO 10535: 2006.

WARNING: Wireless communications equipment such as wireless home network devices, 

mobile phones, cordless telephones and their base stations, walkie-talkies, etc. can affect the 

Maxi Sky 600 and should be kept at least 2.3 m away from it. Cables from potentially strong 

sources of electromagnetic fields should not be placed near the unit.

Battery type Sealed rechargeable valve regulated lead acid battery

Constant voltage charge
Cycle used 14.1 - 14.4 V
Standby use: 13.5 - 13.8 V
Initial current: Less than 2.00 A
Rating: 12 V, 5 Ah

Battery capacity Provides up to 120 transfers with a load of 100 kg (220 lb) 

• up to 70 transfers with a load of 200 kg (440 lb) 
• up to 35 transfers with a load of 272 kg (600 lb)

Degree of protection - Hand control

700.136XX: IPX4 • 700-138XX: IPX7

Degree of protection - Maxi Sky 600 IP21

Lift - protection class - shock prevention

Internally powered equipment

Battery Charger input 100-240 VAC, 50-60 Hz, 57 - 70 VA.

Battery Charger output 700.15500: 27-29Vdc, 1A max

700-24201: 28.1Vdc, 1A max
700-15567: 24Vdc, 24Va, 1A max

Battery Charger safety protection Class 2, double insulated

39

Summary of Contents for Maxi Sky 600

















































Reviews:

No comments