Arjohuntleigh Maxi Sky 600, Technical Manual, Page: 16 / 48

16
Service Procedures
001
.1
415
5.3
3
re
v.
8
5) Replace the 8 screws to fix the shell in place, use the
long screws for plastic (a) and the shorter ones for
metal (b) (see Fig. 33).
6) Connect the hand control to the main circuit board
making sure that the ferrite is not interfering inside the
battery cavity and that the cable is secured passing
through the cord grip built inside the main shell (see
Fig. 34).
Note: If unit is not equipped with a ferrite, add a ferrite
to the cable of the current handset and route the
cable as shown on Fig. 35.
Fig. 34 Fig. 35
Fig. 33
A
A
A
A
B
B
B
B
Connector
Cord grip
Ferrite
Route the
cable around
the three
cord grip