Arjohuntleigh Maxi Sky 1000 Instructions For Use Manual Download

Page: 44 / 44

GETINGE GROUP

is a leading global provider of products and systems that

contribute to quality enhancement and cost efﬁciency within healthcare and life

sciences. We operate under the three brands of

ArjoHuntleigh

GETINGE

and

MAQUET

ArjoHuntleigh

focuses on patient mobility and wound management

solutions.

GETINGE

provides solutions for infection control within healthcare and

contamination prevention within life sciences.

MAQUET

specializes in solutions,

therapies and products for surgical interventions and intensive care.

® and ™ are trademarks belonging to the ArjoHuntleigh group of companies.

As our policy is one of continuous development we reserve the right to modify

designs and speciﬁcations without prior notice.

www.ArjoHuntleigh.com

BHM Medical Inc.

2001 Tanguay

Magog (Quebec) J1X 5Y5

CANADA

Phone: +1

819-868-0441

E-mail: [email protected]

Summary of Contents for Maxi Sky 1000













































Search results

Summary of Contents for Maxi Sky 1000

Reviews:

Related manuals for Maxi Sky 1000

Brands by name

Popular brands

Arjohuntleigh Maxi Sky 1000, Instructions For Use Manual

Search results

Summary of Contents for Maxi Sky 1000

Reviews:

Related manuals for Maxi Sky 1000

Brands by name

Popular brands