Arjohuntleigh Maxi Sky 1000 Instructions For Use Manual Download

Page: 36 / 44

Technical Specifications

PRODUCT INFORMATION

Maxi Sky

1000

Weight, complete

22 kg (48 lb)

Lifting capacity

454 kg (1000 lb)

Strap length

2300 mm (90.6 in)

Lifting speed

6.0 cm/s (2.4 in/s) without load)



3.5 cm/s (1.4 in/s) at 230 kg (500 lb)



2.7 cm/s (1.2 in/s) at 454 kg (1000 lb)

Maximum stroke (from ceiling)

2300 mm (90.6 in)

Horizontal displacement speeds

10, 13, 15 and 20 cm/s. Speed is 15 cm/s (6 in/s) by default

Horizontal axis motor

24 VDC at 62 watts

Vertical axis motor (qty 2)

24 VDC at 110 watts

ELECTRICAL

Duty cycle

Max 10%, 1 minute continuously

Rating

24 VDC, 15 A max.

Noise level for either raising or lowering,
with or without load

61 dBA max.

Medical equipment

Type B protection against electrical shock in accordance with IEC 60601-1

The

Maxi Sky

1000

is compliant with CAN/CSA-C22.2, CSA-Z323.5.98, IEC 60601-1, UL 60601-1 AND ISO 10535.

Battery type

Sealed rechargeable valve regulated lead acid battery

Constant voltage charge

Cycle used 14.1 - 14.4 V

Standby use: 13.5 - 13.8 V

Initial current: Less than 2.00 A

Rating: 12 V, 5 Ah

Battery capacity

Provides up to 80 transfers with a load of 230 kg (500 lb), up to 25 transfers
with a load of 454 kg (1000 lb).

Degree of protection - handset

IPX4

Degree of protection -

Maxi Sky

1000

IP23

Lift - protection class - shock prevention

Internally powered equipment

Battery Charger input

100-240 VAC, 50-60 Hz

Battery Charger output

28.1 VDC, 1 A max

Battery Charger safety protection

Class 2, double insulated

OPERATION AND STORAGE CONDITIONS

Ambient temperature range

-10

C to 50

C (14

F to 122

Relative humidity range

10 % to 80 % incl. condensation

Atmospheric pressure range

Operation: 700 hPa to 1060 hPa Storage: 500 hPa to 1060 hPa

WARNING: Radio transmitting devices such as mobile telephones, two-way radios, etc.,
should never be used near the Maxi Sky

1000

, since they can interfere with the function

of the lift. Cables from potentially strong sources of electromagnetic fields should not
be placed near the unit. See “Electomagnetic Compatibility” section of this manual for
full details.

Summary of Contents for Maxi Sky 1000













































Search results

Summary of Contents for Maxi Sky 1000

Reviews:

Related manuals for Maxi Sky 1000

Brands by name

Popular brands

Arjohuntleigh Maxi Sky 1000, Instructions For Use Manual

Search results

Summary of Contents for Maxi Sky 1000

Reviews:

Related manuals for Maxi Sky 1000

Brands by name

Popular brands