24
Fig. 18
Changing the Speed of Movement
Turn the ceiling lift off by pulling on the red cord. The green LED will turn off.
Press the PROG button on the handset. At the same time, pull the red cord once again. The green light will
flash, and you will hear three beeps.
The red LED will then illuminate. You can now release the PROG button.
Press once the UP button (you will hear one beep) for speed adjustment feature.
Now press the PROG button to confirm the selection.
Using the LEFT button, select one of four predetermined speeds.
Now press the PROG button to confirm the selected speed.
Press UP to continue within the programming mode, or to return to regular mode, pull on the red cord to turn
the ceiling off. Pull the red cord once again. The lift will return to normal use.
Moving
speed of
10 cm/s
Moving
speed of
20 cm/s
(factory
default)
To select
another feature
Exit programming
mode
Moving
speed of
15 cm/s
Moving
speed of
25 cm/s
Entering the Programming Mode
Speed Adjustment
Final Steps
Maxi Sky
1000
Programming
