15
Activity Indicator
After the mattress has inflated and the system is in the
normal operating mode, an
Activity Indicator
icon is
displayed in the top right corner of the LCD screen:
• The
Activity Indicator
rotates in a clockwise
direction to show that the pump is operating
normally.
• The
Activity Indicator
stops rotating and starts
flashing if the pressure changes dramatically e.g. if
the patient moves heavily on the mattress or if the
Weight Range
is changed. Once the pump pressure
has stabilised around its target pressure the
Activity
Indicator
stops flashing and starts rotating again.
Alarms
1. When the pump detects an alarm condition:
• The corresponding visual alarm is displayed on
the LCD screen, as detailed below.
• The LED indicator on the control panel flashes
alternately red and green.
• An audible alarm is sounded, which increases in
pitch if the alarm is ignored.
2. Press the
Run/Standby
button to stop the alarm.
3. Refer to Section 9, Page 27 “Troubleshooting” for
the alarms, their possible causes and their remedies.
If the operation of the pump changes during use,
refer to Troubleshooting procedures on page 27 of
this IFU before calling a service engineer or
contacting your local ArjoHuntleigh sales office
.
