11
4. Controls, Alarms and Indicators
Control Panel
LCD Screen
This displays the operating mode and status of the pump,
as follows:
• Mattress/Seat Status.
• Weight Range (or Mattress Mode, if selected by the
Mode Selection).
• Mode Selection.
• Activity Indicator.
Run/Standby Button
Press the
Run/Standby
button to put the pump into the
Run
mode; the LED indicator changes to green.
To put the pump into
Standby
, press the
Run/Standby
button for approximately three seconds; this prevents
accidental operation. The LCD screen goes blank and
the LED indicator changes to amber.
After you put the pump in
Standby
,
if you press the
Run/Standby
button within approximately 15 seconds
the pump goes straight to the
Run
mode and continues
the previous therapy; if you wait more than 15 seconds
the pump re-initialises and restarts the initial mattress/
seat cushion inflation sequence.
If the mains power is disconnected from the pump while
the pump is operating, the pump enters the
Power Fail
Alarm
mode (refer to “Alarms” on page 15). Press and
hold the
Run/Standby
button; the alarm stops and the
pump switches off completely.
LED Indicator
Select Button
Run/Standby
Weight/Mode
LCD Screen
Mattress/Seat Mode Icon
Weight Range Icons
Activity Indicator
Button
Select Buttons
Mode
Selection
Icon
LED Indicator
Run/Standby Button
