14
Mode
If the
Select
button is pressed during therapy when the
Mode Selection
icon is displayed, then the
Weight
Range
icons are replaced by four
Mode
icons. The
selected
Mode
is indicated by the corresponding icon
being solid and surrounded by a square and the
remaining icons as outlines, as shown in the table below:
To change the
Mode
, do the following:
1. Make sure the
Mode Selection
icon is displayed.
2. Press the
Select
button, and the four
Mode
icons
are then displayed.
3. Press the
Weight/Mode Select
buttons to highlight
the new
Mode
icon. The new
Mode
icon is solid
with a square border.
4. The new
Mode
icon and square flashes and the
Mode Selection
icon changes:
5. Press the
Select
button to confirm the new
Mode
.
6. Press the
Select
button again and the
Mode
icons
are replaced by the
Weight Range
icons.
Active (Alternating) Mode
Backrest Horizontal
Reactive (CLP) Mode
Backrest Horizontal
Active (Alternating) Mode
Backrest Raised
(a)
Reactive (CLP) Mode
Backrest Raised
(a)
a. If the backrest on the bed is raised (the patient is in a semi-recumbent
position), the clinician (or patient) should manually select the
Backrest
Raised
mode (either
Active
or
Reactive
depending on the therapeutic
mode) to increase the pressure in the mattress cells.
